Different machines and tools work better when the right lubricant is used. Each type of lubricant is made to suit specific surfaces, temperatures, and levels of pressure. From oils and greases to dry and penetrating lubricants, knowing where each one fits makes daily tasks easier.
A lubricant company usually has a wide selection designed for different uses in homes, vehicles, and workplaces, which makes finding the right match simpler.
Grease:
Grease is thick and sticky. It stays in place and works well in parts where liquid oil would flow away. Grease is used in bearings, joints, and under heavy loads. It is made by mixing oil with a thickener, sometimes with extra materials to resist heat or water. Grease is useful where long-term coverage is necessary without frequent application.
Motor oil:
Motor oil is a liquid lubricant used mainly in engines. It flows easily through small spaces and reaches all moving parts. It also carries heat away from engine components. There are different grades of motor oil depending on temperature and engine type. Additives in motor oil help reduce sludge, rust, and foaming.
Gear oil:
Gear oil is made for gearboxes and differentials. It has a thicker texture than motor oil and is built to handle high pressure between metal surfaces. It protects gear teeth from wearing out and helps the system run smoothly. Gear oil is often used in manual transmissions and heavy machinery.
Hydraulic fluid:
Hydraulic fluid works inside systems where pressure moves parts, like lifts or brakes. It transfers power without damaging components. The fluid must be clean, stable, and free from bubbles. Some types also protect against rust and wear. Hydraulic systems rely on fluid that performs well under changing pressure and temperature.
Compressor oil:
This type of oil is used in air compressors. It reduces friction, seals parts, and keeps the system clean. Compressor oil also removes heat and helps avoid wear inside the machine. Depending on the type of compressor, synthetic or mineral-based oils may be used.
Cutting fluids:
Cutting fluids are used in metalworking to cool and lubricate the cutting surface. They reduce heat and remove metal particles. These fluids come in different forms, including oils, emulsions, and synthetic solutions. They also protect the cutting tool and the workpiece.
